Notice:
Pay attention to the relevant installation instructions
for additional use!
3
EN
Aug. Winkhaus GmbH & Co. KG
∙ Berkeser Straße 6 ∙ 98617 Meiningen
T +49 369 3950 - 0 ∙ www.winkhaus.de ∙ Subject to technical changes
blueMotion
5044745
53
Installation, Operating and
Maintenance Instructions
3.6.2 Wireless receiver (separate)
Separate wireless receiver for additional applications, such as garage door con-
trol units.
Installation sequence
• Remove the housing cover.
• Fasten the housing with screws.
• Push in the rubber plug (see figure 3.6.2-1).
• Insert the circuit board of the receiver according to figure 3.6.2-2 and
connect it to the control of the other application (e.g. garage door control).
• Put the cover back on the housing and lock and screw it down.
Figure 3.6.2-1: Installing the wireless receiver
