Notice:
If the external control unit and buttons are placed in the
switch box at the same time, they must have a depth of
65 mm!
DANGER!
For safety reasons, you are not permitted to install it
in a switch box with a 230 V AC switch or socket outlet.
Notice:
If plan to installations on a metal substructure, will have
to use a timber board and spacer bolts, if applicable, or large
bore holes to ensure the proper function of the antenna! To test
the scanning performance, may have to tentatively install it
onsite, if applicable.
3
EN
Aug. Winkhaus GmbH & Co. KG
∙ Berkeser Straße 6 ∙ 98617 Meiningen
T +49 369 3950 - 0 ∙ www.winkhaus.de ∙ Subject to technical changes
blueMotion
5044745
50
Installation, Operating and
Maintenance Instructions
• If no switch or button is used beside the door, will have to provide a switch
box with a filler panel for the control unit.
• The transponder antenna is located in a box in exposed installation and is to
be installed at the outside of the door.
• Do not install the antenna directly on metal as its range could be decreased
drastically.
• Do not install any other antenna within a radius of 1 m!
• Connect the cable of the antenna (fixed in the antenna) to the external
control (terminals 15 + 16).
• We recommend: Run a reserve pipe from the antenna to the external control unit.
Prerequisites for installation
• Proper positioning of the wireless receiver is of utmost importance to ensure
its reliable performance.
• Do not install it at or nearby sources of possible interference (e.g. EDP / high-
performance power distributor).
• We recommend installing the receiver on the protected inside of the door to
prevent manipulations to the receiver!
3.6 Access control system wireless remote control