6
EN
Aug. Winkhaus GmbH & Co. KG
∙ Berkeser Straße 6 ∙ 98617 Meiningen
T +49 369 3950 - 0 ∙ www.winkhaus.de ∙ Subject to technical changes
blueMotion
5044745
87
Installation, Operating and
Maintenance Instructions
Error / Display
Possible cause
Troubleshooting
Always locks auto-
matically.
• is set to night ser-
vice mode
• change to day service mode
Mechanical locking
is not possible.
• profile cylinder
without free
moving cam
• position of the
cam > ± 30°
• change the profile cylinder
• check the position of the
cam
No acoustic signal
when the transpon-
der is used.
• transponder chip
too far away from
the antenna
• transponder chip
is not held long
enough in front
of the antenna
• power outage
• bring the transponder chip
closer (approx. 0 - 5 cm) to
the antenna
• hold the transponder chip
in front of the antenna for a
longer time
Wireless receiver
does not register
signals.
• remote control‘s
batteries are
too low
• out of range
• replace batteries
• bring wireless remote cont-
rol closer (at the most 30 m
of unobstructed area)
Door cannot be
opened with the
wireless remote
control. Remote
control‘s LED does
not light up or
flashes.
• batteries are
empty
• replace the batteries of the
wireless remote control
Door cannot be
opened with the
wireless remote
control.
Remote control‘s
LED lights up.
• wireless remote
control has not
been taught
• check the wireless remote
control and / or re-teach
No neutral position
in the event of a
power outage.
• battery is out of
function
• replace the battery
