n = 03 H
Journal end, receipt end (compatible with EPSON-TM930
printer)
ESC c 4 n
Function:
Select Paper Sensors for Print Stop
Code:
<1B> H <63> H <34 >H <n >
Range:
0
≤
n
≤
255
Description:
This command selects the sensor which produces a print stop.
Bit
Function
Value
0
1
0
Journal End
off
on
1
Receipt End
off
on
2
undefined
-
-
3
undefined
-
-
4
Document End
off
on
5
undefined
-
-
6
undefined
-
-
7
undefined
-
-
Remarks:
The printing and/or line feed is always halted when the sensor
belonging to the station is activated and it issues the message
“no paper”. It is possible to select more than one sensor at a time.
The printing is only stopped when the end of a line has been reached
and a line feed has been executed.
If a paper end has been found at the receipt or journal station, the
printer goes into the offline mode after the printing has been halted.
Two sensors are present at the document station (document beginning
and document end); however, this command regards them as one
sensor, which is observed or not observed. Independent of the selec-
tion of the document station, the sensors must always issue the
message “paper available” before a document is confirmed to be
properly inserted (see ESC v and/or ESC +4).
To select the document paper end, you need only set bit 4 or bit 5 to 1.
Description
Control Sequences
GB - 60
