Cleaning Instructions
Cleaning the Transport Axles of the Print Head
In order to prevent a transport fault of the print head, the transport axles should be
cleaned from time to time.
Switch the device off and disconnect it from the mains supply.
Use a clean, soft, lint-free cloth to clean the transport axles; the transport axles re-
main fitted.
Never use cleaning agents such as spirits, as the impregnation of the bearing can be
negatively affected. Do not grease or oil the transport axles after cleaning.
Cleaning the Printing Mechanism
Other sections of the printing mechanism can also be cleaned in this way:
Use a clean, soft, lint-free cloth to clean the document transport and press rollers,
as well as the receipt/journal drive rollers.
The whole document section can be cleaned in the same way. A brush or a Q-
Tip cotton bud can be used to clean inaccessible points.
The document sensor housing and the reflector positioned opposite should be
cleaned using a clean cloth without cleaning solution.
Possible Problems
Appendix
GB - 96
