Next, place the end of the paper on the gui-
de in the paper feed magazine. The correct
position has been reached when the paper
feed motor goes on for a short time.
The receipt paper is automatically drawn in
when the green button is pressed.
Press the button until the paper has been
tensioned and there is no more slack on
the paper.
Check whether the paper is straight, then close the paper compartment cover. After
closing it, some paper will be automatically advanced and cut off. Press the online button
and your printer is again ready for operation.
Always complete the paper change at one station at a time as the paper feed only
functions at one printing station at a time! It is therefore not possible to change paper at
the receipt and journal stations at the same time.
Changing the Receipt and Journal Paper
Operation of the ND69 POS printer
GB - 26
