Remarks:
The furthest left printing position is determined by a home sensor signal.
This applies to this control command only, which thus also norms the
location between the print head position and the half dot position in the
line buffer. Otherwise, every position is determined by counting the
carrier pulses depending on direction.
Owing to the norming of the carrier position, shifts in the location of
lines can occur.
ESC @
Function:
Initialize Printer
Code:
<1B> H < 40> H
Description:
Resets the adjustable printer parameters to the standard values
(default setting; corresponds to the state after switching on the printer)
and norms the printer.
Print station :
Receipt
ND69 mode
receipt
BEETLE/60 mode
receipt and journal
EPSON-TM930 mode
Character
14 cpi
ND69 mode
density :
14 cpi
BEETLE/60 mode
11.7 cpi
EPSON-TM930 mode
Character set :
Integrated (Standard)
Int. character set : Germany
ND69 mode
Germany
BEETLE/60 mode
USA
EPSON-TM930 mode
Wide print :
No
Unidirect. print :
No
Waiting time
m = 1
ND69 mode
Document :
m = 1
BEETLE/60 mode
Time for inserting a document: 1 minute or
m = 0
EPSON-TM930 mode
Time for inserting a document: unlimited
n = 10
Waiting time after recognition of document:
1 second
Print stop
Receipt end, journal end sensors (BEETLE/60 mode)
Sensors:
Receipt end, journal end and document end
sensors (ND69- and EPSON-TM930-mode)
Control Sequences
Description
GB - 49
