Hexadecimal Dump Function
The printer has the Hex-Dump function. This prints the data received from the host on the
receipt in hexadecimal form in the corresponding ASCII characters. This function has the
following features:
Hex-Dump is activated by switching on the printer and, at the same time, holding
down the on-line key. As soon as the ND69 is in the Hex-Dump mode, it prints
out a heading on the receipt.
Characters below 20 Hex are represented in the ASCII field as decimal points.
While Hex-Dump is active, all commands - with the exception of GS ENQ - are
ignored.
The command RESET (ESC @) is also disabled.
The international set of characters used is the US character set.
The receipt roll used must have a minimum width of 76 mm.
Switch off the printer to exit from Hex-Dump.
Hexadecimal Dump Function
Hexadecimal Dump Function
Installation
GB - 18
