Installation
Before Switching On
Unpacking and Checking the Scope of Supply
Unpack the parts and check whether the scope of supply matches the particulars on the
delivery note.
If any damage has occurred in transit, or if there is any discrepancy between the package
contents and the delivery note, please inform your Wincor-Nixdorf outlet immediately.
We recommend that you keep the original packing in case you need to transport the
device in the future (protection against knocks and bumps).
Setting up the Device
Set up the ND69 system where it will not be exposed to extreme environmental
conditions. Protect the device against vibrations, dust, moisture, heat and strong
magnetic fields.
Cabling of the ND69
The devices should be installed in the following order:
Make sure that the power switch on the back of the housing is set at the “off”
position.
Plug the power cable into the power cord receptacle on the printer.
Plug the power cable into the mains socket.
Plug in and secure the data communication cable.
GB - 5
