Will Burt NIGHT SCAN VERTICAL, Operating Instructions Manual

Page: 24 / 100

PAGE 22 OF 98
NIGHT SCAN VERTICAL
OPERATING INSTRUCTIONS
TP-4836201-G
MARCH 2021
Figure 3-11 Remote Control Options (not to scale)
The controllers can be used to operate all functions of the system and are as follows:
1. Wired Hand-Held Remote Control (HHRC): This option includes a 25 foot (7.6 meters)
quick connect coil cord and LED display. It also contains an integrated emergency stop
button.
2. Panel Mount Remote Control (PMRC): This option mounts to a panel and has LED display.
It also contains an integrated emergency stop button.
3. Wireless Hand-Held Remote Control (WHHRC): This option comes with a separate control
box that contains the transceiver. This control box is mounted separately from the mast. A
HHRC can be plugged into the wireless control box and used with the wireless control. Refer
to operating instructions TP-5543301 for installation and operation for the optional WHHRC.
The PMRC plugs directly to the system. The HHRC plugs into a bulkhead connector that can be
located remotely on the vehicle at the operator’s station. See Figure 3-12.
Figure 3-12 HHRC Bulkhead Connection
HHRC PMRC WHHRC
Ground Wire
(Attached to
Bulkhead)
Control Cable
(Attached to Bulkhead)
7-pin Connector