Will Burt NIGHT SCAN VERTICAL, Operating Instructions Manual

Page: 23 / 100

PAGE 21 OF 98
NIGHT SCAN VERTICAL
OPERATING INSTRUCTIONS
TP-4836201-G
MARCH 2021
Lights: The Night Scan Vertical systems can come with a variety of LED or Halogen lighting
packages (Figure 3-10). Lights are attached to the RCP by the light bar. Go to www.willburt.com
for additional information on available light packages.
Figure 3-10 Night Scan Vertical Lights
Camera/Strobe: Go to www.willburt.com for the latest optional cameras and strobe lights.
Lower Magnetic Switch (not shown): This magnetic switch is attached with a band clamp on the
base tube of the mast (see Figure 5-14). It indicates when the mast has reached the stowed
position.
Upper Magnetic Switch (not shown): This magnetic switch is attached with a band clamp on the
base tube of the mast and is located above the lower magnetic switch (see Figure 5-14). It
indicates when the lights have reached a height sufficient to clear all vehicle obstructions to RCP
motion. Once this switch is activated, the RCP functions are enabled.
Labels:
Extra warning labels are provided to attach near the operator control station.
3.5 Remote Control Options
There are three options for controlling the mast functions. Each option provides full system
control. These controllers all have two-way communication with the system and LED display that
include alphanumeric feedback. There are different controllers for dual-tilt and single-tilt RCP
applications. The dual-tilt versions have additional tilt buttons compared to the single-tilt versions.
See Figure 3-11 for a representative picture of each option.