Will Burt NIGHT SCAN VERTICAL, Operating Instructions Manual

Page: 22 / 100

PAGE 20 OF 98
NIGHT SCAN VERTICAL
OPERATING INSTRUCTIONS
TP-4836201-G
MARCH 2021
Control Box: The control box (Figure 3-9) contains the base board for the system, and the
solenoid valve assembly. This is where power and air supply are connected.
Figure 3-9 Control Box
Base Board: The PC Board (PCB) contains the system logical controller and provides landing
points for customer power supply and vehicle interlock cables. The PCB also distributes DC (and
optional AC light) power to components in the system.
Air Control Valve Assembly: The air control valve assembly consists of the extend and exhaust
valve and factory set regulator to control pressure into the mast. Optionally, an air compressor
can replace the air control valve assembly. The mast does not have a switch that indicates the
mast has reached its full extended height. When the mast is deployed, the operator should
release the extension button on the hand-held control. If the operator keeps the button pressed,
the system will continue to build pressure until the safety valve blows off to relieve pressure. The
safety valve is provided with the hardware kit and should be installed at the base of the mast.
Base Board Air Control Valve Assembly
To Mast
HHRC
DC
Control
Light
Power In
Air to
Mast
Coil Cord
Power In