Will Burt NIGHT SCAN VERTICAL, Operating Instructions Manual

Page: 12 / 100

PAGE 10 OF 98
NIGHT SCAN VERTICAL
OPERATING INSTRUCTIONS
TP-4836201-G
MARCH 2021
Manual Tilt!
If manually tilting mast, make sure all power has been disconnected from the sys -
tem prior to manually lowering mast to avoid unexpected motion and/or damaging mast compo -
nents.
Safety Instruction - Motion on Power Interruption or Emergency Stop! Mast uses a normally
open air control valve. If power is lost or turned off or the emergency stop is activated while mast
is extended, mast will begin releasing air pressure and retracting at a controlled rate until power
is restored or mast fully retracts. Masts that fold down will not initiate any tilt motion.
1.3 Symbols Used on Product Labels
The following symbols are displayed on the product. The symbol meanings are as follows:
This symbol indicates an electrocution hazard or hazardous voltage hazard.
There is voltage present inside mast and control box. Do not operate mast
near electrical lines or during electrical storms. Contact with high voltage will
result in death or serious injury.
This symbol indicates a pinch point hazard. Keep fingers and hands clear of
moving parts.
This symbol indicates a tip-over hazard. The mast must be properly
supported during transport, handling, installation, maintenance, operation and
decommissioning. System tip-over could result in death or serious injury.
This symbol indicates a general warning. In this unit, this symbol indicates a
frozen water hazard. Water must be permitted to exit mast to avoid ice
damage to mast.
This symbol is used to remind users to read and understand the operator's
manual before operating the mast system. Failure to follow operating
instructions could result in death or serious injury. Read and understand
operating instructions before handling, installing, operating, or maintaining the
mast system.
This symbol indicates an electrical ground connection point.