14
WIKA operating instructions pneumatic high pressure controller, model CPC7000
0019104001D 10/2018EN
EN
CAUTION!
Instrument is intended to be used up to a maximum altitude of 2,000 meters
CAUTION!
Instrument is intended to be used just indoors and in a dry environment
WARNING!
The pressurized volume of the device under test including any tubing and manifold should not exceed 100 cc.
This instrument is not permitted to be used in hazardous areas!
The instrument has been designed and built solely for the intended use described here, and may only be used accordingly.
The technical specifications contained in these operating instructions must be observed. Improper handling or operation of the
instrument outside of its technical specifications requires the instrument to be taken out of service immediately and inspected by
an authorised WIKA service engineer.
Handle electronic precision measuring instruments with the required care (protect from humidity, impacts, strong magnetic fields,
static electricity and extreme temperatures, do not insert any objects into the instrument or its openings). Plugs and sockets must
be protected from contamination.
The manufacturer shall not be liable for claims of any type based on operation contrary to the intended use.
3.3 Improper Use
WARNING!
Injuries through improper use
Improper use of the instrument can lead to hazardous situations and injuries.
▶
Refrain from unauthorised modifications to the instrument.
▶
Do not use the instrument within hazardous areas.
▶
Do not use the instrument with abrasive or viscous media.
Any use beyond or different to the intended use is considered as improper use. Do not use this instrument in safety or emergency
stop devices.
3.4 Responsibility of the Operator
The instrument is used in the industrial sector. The operator is therefore responsible for legal obligations regarding safety at work.
The safety instructions within these operating instructions, as well as the safety, accident prevention and environmental protection
regulations for the application area must be maintained.
The operator is obliged to maintain the product label in a legible condition.
To ensure safe working on the instrument, the operating company must ensure
■
that the operating personnel are regularly instructed in all topics regarding work safety, first aid and environmental protection
and know the operating instructions and in particular, the safety instructions contained therein.
■
that the instrument is suitable for the particular application in accordance with its intended use.
■
that personal protective equipment is available.
3. Safety
