28
WIKA operating instructions pneumatic high pressure controller, model CPC7000
0019104001D 10/2018EN
EN
6.4.1.2.5
Program Data Entry
The fifth entry method is through the automated Programs stored in the CPC7000 memory. The Program Player allows the user to
select one of the stored Programs and use it for setpoint entry. A Program can be chosen by using the Up [
] or Down [
]
buttons. After selecting the desired program, press the Play [
] button to start the program. More information on the Program
Player and how to create/ edit programs is available i
n Section 6.4.7, Programs Application
.
Figure 6.4.1.2.5 Program Data Entry
6.4.1.3
Units and Pressure Type
The Units button is always displayed. When the units button is pressed a selection of imperial and metric units will be displayed
on the right (Figure 6.4.1.3-A).The Pressure Type button is only active if there is an optional Barometer installed. Otherwise, the
Pressure Type button becomes a label (Figure 6.4.1.3-B) indicating the native mode of the instrument (absolute or gauge). When
an optional barometer is installed, a native gauge transducer can emulate absolute pressure using the barometric reference.
Alternatively, a native absolute transducer can emulate gauge pressure. Emulation can be activated simply by pressing the
Pressure Type button
Figure 6.4.1.3-A Pressure units
Figure 6.4.1.3-B Pressure type
6.4.1.4
Bar Graph
An optional bar graph can be displayed below the current pressure value. The bar graph indicates the relative position of the
current value within the maximum range of the primary transducer. This bar graph will appear in the Home App when selected from
the Display Settings App (Section 6.4.4).
Pressure Units button
Pressure Type button
6. Operation
