33
WIKA operating instructions pneumatic high pressure controller, model CPC7000
0019104001D 10/2018 EN
EN
6. Operation
6.4.2.3
Volume
The Volume setting provides a way to turn on or off the touch screen audio feedback.
Figure 6.4.2.3 Volume
6.4.2.4
User Base Units/ Base Units Multiplier
When choosing a unit of measure from the Home Application (main screen), standard units can be chosen in addition to two user
defined units. User units 1 and 2 are defined in the Settings App using “User 1 base units”, “User 1 multiplier” and / or “User 2 base
units”, “User 2 multiplier”. If the display of a special unit is needed, then a base unit should be chosen (psi, bar or Pascal) as the
“User base unit” and the “User multiplier” can be entered to derive the special unit using the formula: Special unit = Base Unit x
Unit multiplier. When set this way, and the user unit has been chosen from the main screen, then the user unit will now display the
Special unit as derived.
Figure 6.4.2.4 User base units/ Base units multiplier
