34
WIKA operating instructions pneumatic high pressure controller, model CPC7000
0019104001D 10/2018EN
EN
6. Operation
6.4.2.5
Barometer Units
When the Barometer Units button has been chosen, a list of Imperial or Metric units is presented on the
right side of the screen. Any of these units can be chosen from this list for the barometric readout. The
barometric pressure readout can be seen on the bottom right of the Home App.
Figure 6.4.2.5 Barometer units
6.4.2.6
Configuration
Configuration is the last parameter in the Settings App. It allows the operator to save instrument settings and load them as a
group, as needed, in the future. Configuration variables that are currently set in all Apps can be saved using the Configuration
“Save” button and recalled using the Configuration “Load” button. Simply set all desired variables in each app, then go to
Settings-Configuration, press one of the numbered Configuration buttons then press the “Save” button. This will save the current
configuration in that button. To reload a saved configuration at a later time, go to Settings-Configuration and press the numbered
configuration button corresponding to the saved configuration and then press the “Load” button.
Figure 6.4.2.6 Configuration
The instrument default configuration can be activated simply by pressing the “Default” Button.
