All information, illustrations and specifications in this manual are based on the latest information
available at the time of publication. We reserve the right to make changes at any time without notice.
35
6.0. Before Using
6.6. Raising the rear roller
NOTE :
The rear roller is a safety
feature and must not be
removed.
By being raised, the rear
roller acts as hoop guard for
the danger zone behind the
working tools.
For working with hollow
tines we recommend setting
the trailing rolling high:
Lift the TERRA SPIKE
Loosen the cotter pin (A) and
pull out the locking pin (B).
Raise the rear roller by hand
into the horizontal position
In the uppermost position
on both sides, insert the
locking pin (B) as seen in
Figure 870.39 and secure
with the cotter pin (A).
