All information, illustrations and specifications in this manual are based on the latest information
available at the time of publication. We reserve the right to make changes at any time without notice.
44
8.0. Service
8.5. Locking safety cover
The cover must be locked in an
open position to prevent it
from falling during all work
that requires it to be open.
To lock it as shown in the
picture insert the spring clips
into the cover.
8.6. Checking or replacing rubber parts
ATTENTION !
Carry out this maintenance work
only with the equipment
demounted.
1.
Open hood and secure as
specified in Chapter 8.5.
2.
To check the rubber parts, pull
back hard on a tine of the tool
head and hold.
3.
Check the rubber parts
a) metal rail for
-cracks in the rubber part
-the rubber part is loose
-from the metal plates.
b) Check buffers for
-dirty surface
-broken surface
Damaged rubber parts must be
replaced.
