All information, illustrations and specifications in this manual are based on the latest information
available at the time of publication. We reserve the right to make changes at any time without notice.
54
8.0. Service
8.11. Installing drive
18.
Turn the hex nut
(F)
approx.
20 mm upwards.
19.
Turn the hex nut
(E)
down a distance
"X" = 70 mm (2.76 in.)
.
20.
Check the belt tension as
specified in Chapter 8.9.
21.
Carry out the correction
with the hex nut
(F)
.
22.
Lock in the settings with
the nuts above
(C)
and
below
(D)
.
23.
Attach the side guard
(A)
by
uniformly tightening the hex
bolts.
