All information, illustrations and specifications in this manual are based on the latest information
available at the time of publication. We reserve the right to make changes at any time without notice.
32
6.0. Before Using
6.4. Adjusting the TERRA SPIKE
NOTE
Always make adjustments
when the device has been
attached and in lifted
position.
On delivery of the
TERRA SPIKE the angle
of insertion is set to
zero position.
Each time the device is adjusted,
tine length
“A“
must be measured.
The distance
“B“
represents
the desired working depth.
Sequence when adjusting the
TERRA SPIKE :
1) Adjust working depth:
a) By moving the spring bolt
(C)
,
the handle
(D)
is unlocked.
b) Set the pointer
(E)
to the
measured tool length
on the scale
(F)
c) Rotate the crank until the
pointer (E) has reached the
desired working depth on
the scale (G).
d) To fix the setting in
place, the handle
(D)
must be again locked.
e) On both sides, tighten the
retaining screws
(L)
and fix in place with the
locknuts
(M)
.
2) Lower the TERRA SPIKE on the
front roller.
A
B
870.29
