All information, illustrations and specifications in this manual are based on the latest information
available at the time of publication. We reserve the right to make changes at any time without notice.
24
4.0. Attachment to tractor
4.2. Attachment to the tractor
Prerequisite for connecting:
a three-point hitch.
NOTE :
° note the bending angle
of the PTO shaft.
Mounting steps:
1.
Pin and secure the lower link
with the pins (A) in the correct
hole pattern on the frame.
2.
Pin and secure the upper link
with the upper link pin (B) in
the correct hole pattern.
3.
Tighten the tension lock (5)
of the stabilizing chain.
4.
Adjust the universal shaft
(refer to Chapter 4.3.).
5.
Remove the PTO shaft by doing
the following:
Press the PTO shaft slider pin
and push up the PTO shaft
6.
Secure the PTO shaft guard
against running along,
7.
Place the chain (D) for
storing the PTO shaft around
the guard (E) and attach.
8.
Using the rear hydraulic
system of the tractor, raise
the Terra Spike.
9.
Pin and secure the support (F)
in the uppermost position.
ATTENTION DANGER !
Check that it is correctly
connected before starting
operation.
