All information, illustrations and specifications in this manual are based on the latest information
available at the time of publication. We reserve the right to make changes at any time without notice.
47
8.0. Service
8.8. Replacing the tool head
ATTENTION !
Only perform maintenance work
when the TERRA SPIKE is
mounted. Switch off the tractor
and secure it against
unintentional starting.
There is a risk of injury due
to the tine tip.
1.
Place tine holder that is
being worked on in up
position (by pressing on an
upright tine holder).
2.
The tool head can be replaced
with the ratchet (A) and the
socket (B) (stored in the
sleeve above).
3.
By loosening the hex bolt (C),
the tool head can be removed.
4.
When mounting the tool head,
the hex bolt (C) is to be
tightened to a torque of
110 Nm (81.13 lbf ft)
.
