All information, illustrations and specifications in this manual are based on the latest information
available at the time of publication. We reserve the right to make changes at any time without notice.
50
8.0. Service
8.10. Changing drive belt
10.
Install the drive belt
(K)
.
11.
Fit the V-belt pulley
(L)
into the drive belt.
12.
Push the tapered tensioning
bushing
(N)
(of the V-belt
pulley) onto the shaft
(M)
.
13.
Align the spring bushing
(N)
with the securing holes of
the V-belt pulley.
14.
The V-belt pulley
(L)
is to be
aligned to the other V-belt
pulley
(P)
with the aid of a
ruler.
15.
Secure the V-belt pulley by
screwing the setscrews
(H)
into the holes.
16.
Slide the compression spring
(G)
with the lower and upper
bushing from below onto the
threaded rod.
17.
By using a tire iron
(R)
,
press the tensioner pulley
lever
(B)
down so that the
first hex nut below
(F)
can
be attached.
