All information, illustrations and specifications in this manual are based on the latest information
available at the time of publication. We reserve the right to make changes at any time without notice.
29
6.0. Before Using
6.2. Indicator and adjustment components
Crank (A) for adjusting the
working depth (raising or
lowering the roller).
Scale (B) for the tool length
Depth scale (C) for reading off
the set working depth Ruler (D)
and pointer (E)
Spindle (F) for setting the
plunging angle
The setting is carried out
using the supplied tool (stored
in the sleeve above):
1. Ratchet (G)
2. Socket (H)
Indicator (K) for setting the
plunging angle (shows the angle
setting from 0 to 18 degrees).
