All information, illustrations and specifications in this manual are based on the latest information
available at the time of publication. We reserve the right to make changes at any time without notice.
31
6.0. Before Using
6. 3.1. Mounting tines in cylindrical holders:
1.
Remove the protective cap
(A)
from the tool head
(B)
.
2.
Loosen nut (C).
3.
Place 1/2“ tine (E) or 5/16“
tine (F) with bushing (G) as
shown in illustration.
4.
Check that the tip of the
tine is correctly positioned
to the direction of movement.
5.
Turn screw (B) into the
recess in the tine.
6.
Fix counter nut (C) to lock
screw (B).
7.
Check the tines for tight
fit.
NOTE
Check all tines for tight fit:
Before using them
If they have just been
mounted, check again after
three minutes of operation.
870.28
A B
C
D
F
G
E
