All information, illustrations and specifications in these Operating Instructions are based on the latest information available at the time of
publication. We reserve the right to make design changes at any time without prior notification
37
8.0. Maintenance
8.9. V-belt drive
Check V-belt tension on a
regular basis. The V-belt
must press between the belt
pulleys by about 15 mm at a
load of 60 N.
1.
Release securing screws (A)
and locknut (B).
2.
Insert screw (C) until the
values for the correct V-belt
tension are reached.
3.
Tighten locknut (B) to secure
setting.
4.
Tighten screw (A) to secure
drive bearing.
15 mm
60 N
329.23
