All information, illustrations and specifications in these Operating Instructions are based on the latest information available at the time of
publication. We reserve the right to make design changes at any time without prior notification
34
8.0. Maintenance
8.6. Cleaning the material collector
CAUTION :
Clean with a hand brush
or water only - never
with your bare hands.
RISK OF INJURY !
Clean the machine daily after
completion of collecting work.
This will ensure that the machine
is in perfect working order the
next time you use it.
Only clean grid plates allow the
machine to be filled to full
capacity and permit proper
functioning.
Main cleaning areas are:
Intake fitting
Suction hose
Blower
Grid plates in the
container flap
Perforated screens in hopper
and hopper gate
Do not open the cleaning flap
(A)
unless the drive has been
switched off.
Only open the cleaning flap
(A)
to clean the perforated plate
(B)
in the hopper gate.
