All information, illustrations and specifications in these Operating Instructions are based on the latest information available at the time of
publication. We reserve the right to make design changes at any time without prior notification
31
8.0. Maintenance
8.1. General information
CAUTION :
The engine must be shut
down before all tasks. The
ignition key must also be
removed.
The centrifugal mass may
cause the blower to run on.
Do not move too near to the
machine during this time.
Work can only be continued
when the device is at a
standstill.
Due to the danger of
tilting, maintenance work
can only be carried out
with the equipment
installed.
Upon completion of
maintenance work, reinstall
all protective devices.
8.2. Blower wheel
When working with the collector,
foreign bodies will inevitably
get sucked into the machinery.
The damage caused to the blower
wheel in this way can even lead
to wheel imbalance.
If you detect a wheel imbalance,
the machine must be shut down
immediately.
The blower wheel must be removed
and balanced.
