All information, illustrations and specifications in these Operating Instructions are based on the latest information available at the time of
publication. We reserve the right to make design changes at any time without prior notification
23
4.0. Tractor attachments
4.5. Connecting the hydraulics
The hydraulics are connected to
the hydraulic connectors on the
rear end of the tractor.
If the tractor does not have a
hydraulic connector, contact
your dealer.
4.6. Cardan shaft adjustment
For length adjustment, hold the
cardan shaft halves in the shortest
operating position beside each
other and mark.
Shorten inner and outer sliding
profiles by the same length as the
guard tube.
Shorten inner and outer guard tubes
by the same length.
Round off the separating edges and
carefully remove chips. Grease
sliding profile.
