All information, illustrations and specifications in these Operating Instructions are based on the latest information available at the time of
publication. We reserve the right to make design changes at any time without prior notification
29
7.0. Operation
7.4. High-level tipping of container
Switch off mower and
collector.
Lift up mower.
Drive to filling object,
stopping just before it.
The collecting device needs
to be on the chassis for
emptying.
Move control valve on
collector to position
A
.
CAUTION :
The high-level tipping
system must NOT be
actuated when the
collector is at an angle.
DANGER OF TILTING !
Lift up container by
actuating control valve on
tractor.
With container raised up,
drive carefully over to
desired filling object.
Switch over control valve on
collector to position
B
.
Initiate container tipping
procedure by actuating the
tractor control valve.
Drive away again after the
filling object has been
emptied.
To close the container flap,
move the lever on the tractor
control valve to the required
position and hold there until
the container flap is closed
and the control valve on the
collector has been switched
back to position
A
.
To lower the container, move
the lever of the control
valve on the tractor to the
appropriate position.
329.19
