All information, illustrations and specifications in these Operating Instructions are based on the latest information available at the time of
publication. We reserve the right to make design changes at any time without prior notification
17
2.0. Assembly
2.3. Fitting the long attachment
ATTENTION DANGER !
Swing the moving gear back and secure it
against rotating (see section 4.2.)
secure to a crane, hook the round sling
suspension tackle to the upper guide
bar pin.
This will prevent the vacuum collector from
tilting forward.
The lower guide bar pins
(A)
and the
support
(B)
must only be removed
when the machine is secured.
On the right-hand side of the
machine, the support is fitted to
the mounting bracket
(C)
and screwed
on securely.
On the left-hand side of the
machine, screw the mounting bracket
on securely.
Fit the upper guide bar extension
(D)
.
Fit the longer blower cover
(E)
supplied with the long attachment.