background image

 

                                                                                                     

www.hhigreen.com

 
 
 

 

Page 1 of 18 

 

 

Sales Office 

Bundang First Tower, 55, Bundang-ro., 
Bundang-gu, Seongnam-si, Gyeonggi-do 
13591, Korea 

Factory 

 

313, Soi-ro, Soi-myeon, Eumseong-gun, 
Chungcheongbuk-do 369-872, Korea 

INSTALLATION MANUAL 

Effective April 4, 2017

 

1.  Introduction

 

·

 

This Installation manual contains information regarding the installation and the safe handling method 
of the photovoltaic module (hereafter referred to as “module”) supplied by  Hyundai Heavy Industries 
Green Energy 

Co., Ltd. (hereafter referred to as “HHIGE”). 

·

 

System Users and Installers should read and  understand this  manual before handling, installing the 

module. For any questions, please contact Customer Support department or our local representatives 

for more detailed information. 

·

 

Before  installing  a  solar  photovoltaic  system,  mechanical  and  electrical  requirements  for  the  total 

system should be checked as well. Keep this manual in a safe place for future reference. 

·

 

The  installer  should  conform  to  every  safety  precautions  specified  in  this  manual  and  local  codes 

when installing a module.   

·

 

HHIGE  modules  are  tested  and  certified  for  installation  worldwide.  Different  regions  may  have 
different regulations for solar PV installations. In this manual, hereafter “IEC only” is used to refer  to 
regions  where  IEC  standard  applies,  e.g.  Europe,  Middle  East,  most  of  Asia  Pacific  countries;  “UL 
only”  is  used  to  refer  to  regions  where  UL  standard  applies,  e.g.  United  States,  Canada;  all  other 
references are global. 

 

2.  General Information 

This  manual  provides  the  installation  information  for  HHIGE  modules.  Each  individual  module  has  a 

unique serial number. 

 

Serial number : YYMMDD-XX-M(S)xxxXX-0001(~9999) (Ex. 140317-21-S260RG-0001) 

 

·

 

YYMMDD : Production date 

·

 

XX : Internal admin number 

·

 

M(S)xxxXX : Model (xxx : Peak power at STC(Pmax)[W], XX : RF/RG/RI/TF/TG/TI) 

·

 

0001(~9999) : Serial number 

 

2.1   Disclaimer of Liability 

1)  HHIGE does not have any responsibility and liability for clause as below. 

·

 

Loss,  damage,  injury  or  expense  resulting  from  improper  installation,  handling  or  use.  The 

installation techniques, handling and use of this product are beyond company control. 

·

 

Infringement of any third party

’s patent or right that is caused by using HHIGE modules. 

·

 

Loss,  damage,  injury  or  expense  resulting  from  any  factor  that  is  unsuspected  the  module  was 

produced or shipped. 

2)  HHIGE reserves the rights for any change the technical specification including the PV production, the 

specifications, or the product information sheets without prior notice.

 

 

Summary of Contents for HIS-M210RF



















Reviews: