All information, illustrations and specifications in these Operating Instructions are based on the latest information available at the time of
publication. We reserve the right to make design changes at any time without prior notification
36
8.0. Maintenance
8.7. Threaded bolt for fine adjustment of the hopper gate
Once the hopper has been
adjusted, raise it until the
upper guide bar (A) reaches a
horizontal position.
Tighten the hexagon nut (D) to
secure the adjustment.
Undo the hexagon nut (C).
Move the two half shells back
to their starting position.
Tighten the fixing screws on
the half shells.
8.8. Wheels
Check the air pressure on a
regular basis : 2 bar
CAUTION :
Serious or fatal
injuries caused by
tires and rim parts can
result through
explosion-type bursting
of the tires.
Always make sure that tire
pressure is correct and does
not exceed the specified
maximum pressure limit.
Check wheels and tires daily
for underpressure, cuts,
warping or damaged rims.
