13. THROTTLE CUT SETTING
This function is to shut off the engine at the end of a flight. The
engine can be stopped with one touch of any switch, eliminating
the need to move the trim to kill the engine and then readjust prior
to each flight. The helicopter THR CUT includes an ON/OFF
throttle position (normally a little above idle). You must move the
THROTTLE STICK back below the set point before the THR-CUT
function can be reset, to avoid sudden engine acceleration.
Setting Method:
Use up/down keys to select
THROTTLE CUT SETTING
, OK to
enter editing.
Steps:
1. Use direction keys to select editing part.
2. Use +/- keys to select on/disable.
3. Use +/- keys to set the throttle rate and trim (range is between
0 to 45%).
4. Use
direction keys to select switch
,
use
+/-
keys
to
select
switch(A
-
F
)
and
swi
t
ch
position
(
0
,
1
,
2
,
3
)
.
5. Press EXIT after setting.
WFT08X
INSTRUCTION
94
AIRPLANE
