User Guide
4. Part Replacement
4.10 M.2 Replacement
Figure 218:
CMA Orientation
c.
Slowly slide the enclosure forward to ensure the arm is operating properly, then slide it
back into the rack.
a. CMA Standard:
Repeat these steps to install the upper arm with the elbow facing to the
right.
Step 19 :
Install the Drive Assembly.
a.
Ensure that the enclosure has been pulled out of the rack until the rail latches engage.
b.
Find the LED pointer on the top of the drive carrier. This pointer should point toward the
front of the unit as shown in the following image.
189
