User Guide
4. Part Replacement
4.13 Rails Replacement
Figure 306:
Rack Latch Bracket Installed
b.
Use 6 of the included M5 x 12mm screws and the T15 Torx screwdriver to install each
bracket, 3 screws per bracket.
Caution:
Always install the top cover onto the enclosure before installing the chassis into a
rack. Not having the top cover installed may damage the alignment brackets.
Step 22 :
Install the chassis into the rails.
a.
Extend the bearing plates on the inside of the mid-rails until they are fully forward (detent
has engaged). This prevents potential damage due to improper mating of the rails.
250