User Guide
4. Part Replacement
4.9 Heat Sink Replacement
4.9
Heat Sink Replacement
Note:
The Heat Sink is not hot swappable. The enclosure must be powered-down,
disconnected from all cabling, and removed from the rack before replacing the Heat Sink.
Table 44:
Procedure Info
Required Tools
Required Parts
# of People Required Time Required
•
T30 Torx Screwdriver
•
Plastic Spudger
(not provided)
•
Isopropyl Alcohol
and lint-free wipes
(not provided)
•
T30 Torx screws
3
~2h
Step 1 :
Uncable the CMA(s).
a.
Open all of the basket clips on the CMA(s).
Figure 152:
Open Baskets
143
