User Guide
5. System Management
5.6 Subenclosure Nickname
Figure 494:
Quad HBA/RAID Zoning Configuration
5.6
Subenclosure Nickname
5.6.1
Setting the Subenclosure Nickname
This task describes instructions for viewing and setting a subenclosure's nickname using
sg_ses
commands.
•
In the following
sg_ses
examples, angle brackets surrounding a term (i.e.
<device>
) either indicate
a generic reference to an expected output or a command phrase that should be replaced with the
user's specific instance of that phrase (i.e.
/dev/sg2
).
•
An enclosure consists of one or more subenclosures. If a single subenclosure is present, then that
subenclosure is considered the primary subenclosure, and there are no secondary subenclosures. If
multiple subenclosures are present, then:
1.
only one subenclosure is the primary subenclosure;
379