User Guide
4. Part Replacement
4.10 M.2 Replacement
Figure 204:
Safety Latch Release
d.
Depress the latch release lever for the safety latches on the rail and push the chassis very
slightly forward. The chassis is now unsecured from the rack.
e.
Ensure that you have the proper support mechanism to hold the chassis in position,
whether that be a team lifting partner or an appropriate lift.
Warning:
Do not lift the chassis by the Cable Tray while removing the
chassis from the rack OR while installing it into a rack. This can cause
serious damage to the unit or serious bodily harm to those handling the
unit. Always team lift the chassis by gripping the underside of the unit,
and never try to lift a chassis that is filled with drives.
f.
Slide the chassis forward to free it from the rails. Place the chassis in a safe location to
avoid damage.
Step 10 :
Attention:
Place the enclosure on a flat ESD safe surface and ensure it is stable
before continuing with the procedure.
Step 11 :
Uninstall server cover panel over the Add-in cards. The server cover panel that needs to be
removed is located (from the rear of the enclosure) on the right side of the enclosure.
a.
Remove the screws that secure the server cover panels to the chassis using a T7 Torx
screwdriver.
180
