User Guide
4. Part Replacement
4.8 CPU and Heat Sink Module Replacement
Figure 150:
Open Baskets
c.
Route all of the cables being connected to the enclosure through the open baskets.
d.
Close all of the baskets.
e.
If the Ultrastar 8 is being installed in a rack and will subsequently be transported
inside that rack, it is important to use the included cable tie to wrap the CMA bundle
to ensure it does not get damaged during transport. If the Ultrastar 8 is instead
being installed where it will be operated, skip this step. Remember to remove the cable
ties after the enclosure has reached its final operational location.
f.
Reconnect the arm at the elbow to the connectors on the rail.
CMA Lite:
a.
Press the blue latch button labeled "push" to unlatch the elbow side of the CMA arm, and
then swing the arm open.
b.
Open all of the baskets.
141
