User Guide
4. Part Replacement
4.4 System Fan Replacement
Step 2 :
Locate the faulty System Fan by the flashing amber LED near the rear of the drive bay and the
center channel that will be lit on top if there is a fault or by activating the identify LED on the
System Fan being replaced.
Step 3 :
Remove the new System Fan from its packaging.
Step 4 :
Uninstall the internal System Fan.
a.
Lift the System Fan flap and insert a finger into the service hole on the top of the System
Fan and pull up to release the latch.
Figure 52:
Lift the System Fan Flap
Figure 53:
Unlatching System Fan
b.
Use the handle to pull evenly on the component to remove it from the enclosure.
75
