Welch Allyn Spot Vital Signs 4400, Service Manual

Page: 44 / 132

2. Mount the device onto the tilt tensioner of the wall board.
a. Attach the bottom of the device bracket onto the tilt tensioner so that the device hooks
into place as shown in the illustration.
b. Attach the top of the device bracket onto the tilt tensioner so that the device hooks into
place as shown in the illustration. Apply some pressure to the top of the device and push
down until the device slides down into the hook of the top tilt tensioner.
c. Tighten the screw to secure the device bracket to the tilt tensioner.
Exploded view diagram
The drawing below shows individual components of the device and their relationships to one
another.
40 Disassembly and repair