Welch Allyn Spot Vital Signs 4400, Service Manual

Page: 28 / 132

Specify date and time settings
1. In Advanced settings, touch the
General
>
Date / Time
tabs.
2. Specify settings.
Setting Action/Description
Time zone Select the appropriate UTC time zone from the
drop-down.
Date format Select a format for displaying the date.
Enable daylight saving time Check this box to automatically update the device
time when Daylight Saving Time starts and ends.
3. Optionally, configure other advanced settings.
4. When you are finished configuring advanced settings, touch
Exit
to return to the
Home
tab.
Specify power management settings
1. In Advanced settings, touch the
General
>
Power management
tabs.
2. Specify settings.
Setting Action/Description
Allow sleep mode Check this box to enable the device to
automatically enter sleep mode after a period of
inactivity. Then, set the Automatic sleep timeout
period (1-30 minutes).
Allow automatic shutdown Check this box to enable the device to
automatically shut down after a period of inactivity.
Then, specify the Automatic shutodwn timeout
(1-30 minutes).
3. Optionally, configure other advanced settings.
4. When you are finished configuring advanced settings, touch
Exit
to return to the
Home
tab.
Review the open source software disclosure
1. In Advanced settings, touch the
General
>
Open Source
tabs.
2. Read Welch Allyn's disclosure about its use of "free" or "open source" software.
3. Optionally, configure other advanced settings.
4. When you are finished configuring advanced settings, touch
Exit
to return to the
Home
tab.
Parameters tab
Specify advanced NIBP settings
1. In Advanced settings, touch the
Parameters
>
NIBP
tabs.
2. Specify settings.
Setting Action/Description
Default view Select default primary and secondary views.
Unit of measure Select the NIBP unit of measure for display.
24 Advanced settings