Welbilt FB081TF, Service Manual

Page: 9 / 96

Part Number REV00 04/08/2020 9
Importar
Only a qualified service technician must perform
installation, start-up, and service of this equipment. This
includes all instructions and procedures in this document.
Mpdel & Seoitl NuIbeos
This manual covers the following models:
FoeshBleadeo Beveotge SysreIs
FB081TF
HOW TO READ A MODEL NUMBER
PltrfpoI Fltvpos Mixeos Plug Refoigeotar Hiage Omripatl
FB
(FreshBlender)
08
(8 Flavors)
06
(8 Flavors)
1
(1 Mixer)
2
(2 Mixer)
T
(115V
60hz)
F
(R-404A)
P
(R-290)
R
(Right)
L
(Left)
Used for
Build
Specific
Info
B
(220V
60hz)
Z
(Bare
Lead)
E
(Euro
16
Amp)
U
(UK 13
Amp)
SERAL NUMBER LOCATON
The FreshBlenders beverage system serial number is listed on
the serial tag affixed to the inside left and rear left of the unit.
StImle Seoitl Ttg
NOTE: Once the unit is registered online during the startup
procedure the serial number can also be found in the
Service Screen under Subsystem Versions after the machine
has been properly registered and a Machine ID assigned.
Wtootary afpoItripa
Consult your local Service Agent or Representative for terms
and conditions of your warranty. Your warranty specifically
excludes all general adjustments, cleaning, accessories and
related servicing.
Your warranty should be activated at the time of
installation/registration or a card must be returned to
activate the warranty on this equipment. If either method
is not completed, the warranty period can begin when the
equipment leaves the Welbilt factory.
No equipment may be returned to Welbilt without a written
Return Materials Authorization (RMA). Equipment returned
without an RMA will be refused at Welbilt’s dock and
returned to the sender at the sender’s expense.
Please contact your local distributor for return procedures.
Secripa 1
Geaeotl afpoItripa