wayscral EVERYWAY E-250, Manual

Page: 43 / 252

43
•
Brake pads are standard, replace them when your pad no longer has a friction component.
•
The reference of the brake pad mounted on your bike is as follows:
Model: MT200
Reference: B01S
Remember that new brake pads must be broken in. They are broken in by riding for a few minutes and
alternating between sudden stops and light braking.
2. Changing the brake pads
Remove the wheel and remove the worn pads from the brake caliper. Position the new pads in the
caliper so that the braking surfaces come into contact. Do not touch the braking surfaces. Insert the
pads one after the other into the brake caliper.
Then adjust the brakes as described in the previous paragraph.
3. Wear of the wheel rims
Like any part subject to wear, the wheel rim should be checked regularly. The wheel rim can weaken
and break, causing you to lose control and fall.
WARNING: it is very important to check the wear of the wheel rims. A damaged wheel
rim can be very dangerous and must be replaced.