Waters Quattro Premier XE, Operator'S Manual, Page: 51 / 86

Safety and handling 4-3
Safety and handling
Bear in mind the following safety considerations when performing
maintenance procedures.
Removing O-rings and seals
When performing certain maintenance procedures, you will need to remove
O-rings or seals from instrument components. An O-ring removal kit is
provided with the instrument. You must dispose of all O-rings and seals that
have been removed; do not re-use old O-rings or seals on the instrument.
O-ring removal kit
Warning:
To avoid self contamination with toxic and
biohazardous materials, always wear chemical-resistant,
powder-free gloves at all times while handling the components.
Warning:
Many of the procedures in this chapter involve the
removal of contaminating deposits using flammable or caustic
agents. You must be aware of the risks, and take suitable
precautions.
Warning:
To avoid electric shock, ensure that the instrument is in
standby before commencing any maintenance.
Warning:
To avoid burn injuries, take great care while working with
these components. The probe and source may be hot.
Tool 1
Tool 2