Safety and Handling
99
6
Chapter 6
Troubleshooting
This chapter describes how to troubleshoot the instrument using recommended
troubleshooting procedures. This chapter addresses the following topics:
•
Component hardware troubleshooting
•
Checking the APCI probe
6.1 Safety and Handling
Proper Operating Procedures
To maintain optimal performance, follow the operating procedures and guidelines in this
guide.
Spare Parts
See
Appendix C, Accessories and Spare Parts
, for spare parts information. Parts not
included in
are not recommended for replacement by the customer.
Caution:
Observe good laboratory practice when you handle solvents, change tubing, or
operate the instrument. Refer to Material Safety Data Sheets for the solvents you use, and
know their chemical properties.
Caution:
To avoid possible electric shock, never disconnect an electrical assembly while
power is applied to the instrument. Once power is turned off, wait about 10 seconds
before you disconnect an assembly.
Caution:
To avoid possible electric shock, do not open the power supply cover. The power
supply does not contain user-serviceable parts.
STOP
Attention:
To prevent circuit damage from static charges, do not touch integrated circuit
chips or other components that do not require manual adjustment.
Summary of Contents for Micromass ZQ 2000
Page 6: ......