6.3.4.6
MDF separator in HFO installations (1S02)
A separator for MDF is recommended also for installations operating primarily on HFO. The
MDF separator can be a smaller size dedicated MDF separator, or a stand-by HFO separator
used for MDF.
6.3.4.7
Sludge tank (1T05)
The sludge tank should be located directly beneath the separators, or as close as possible
below the separators, unless it is integrated in the separator unit. The sludge pipe must be
continuously falling.
6.3.5
Fuel feed system - MDF installations
Fig 6-5
Example of fuel oil system, MDF (DAAF42878)
System components
Circulation pump (MDF)
1P03
Diesel engine Wärtsilä L46F
01
Leak fuel tank, clean fuel
1T04
Adaptor
02
Day tank (MDF)
1T06
Cooler (MDF)
1E04
Leak fuel tank, dirty fuel
1T07
Fine filter (MDF)
1F05
Quick closing valve
1V10
Suction strainer (MDF)
1F07
Leak fuel drain, dirty fuel
104
Flow meter (MDF)
1I03
Pipe connections
Fuel inlet
101
DAAB605814
6-17
6. Fuel Oil System
Wärtsilä 46F Product Guide
Summary of Contents for 46F Series
