BATTERY KIT INSTALLATIONS
80101387
EO6410 Rev 04
7-22-10
BATTERY AND PUMP BOX INSTALLATION
Locate battery box and pump box in a suitable location
under the vehicle body (refer to previous page.)
Weld hanger channels to body crossmembers.
Hint:
To save space, hanger channels can be cut down and
boxes moved closer together as shown.
Install batteries.
GR01390
INSTALLATION OF BATTERY CABLE
Install battery cable supplied with liftgate to the pump
starter solenoid.
For trucks:
Route cable to vehicle batteries, cut to desired length.
Cut cable to reach auxiliary batteries, and cut remaining
piece to reach from auxiliary batteries to vehicle
batteries.
For trailers:
Route cable to auxiliary batteries, cut to desired length.
Use cable supplied with trailer kit and route from
auxiliary batteries to nose of trailer.
NOTE: Do not connect cables to any batteries at this
time.
GR01391
BODY
CROSSMEMBERS
PUMP BOX
BATTERY BOX
HANGER
CHANNELS
Cable runs to
vehicle batteries or
nose of trailer
4
4
